[Elecraft] Re: KAT2 C55 adjustment - jumping 099-000

[ub5_073_oleg]

I think I found it. Making 1-turn loop through T1, I made
the wire jumper about 1/4" shorter as suggested in manual.

After replacing it with "correct" 1-1/4" one, I am able to
reach 007 mV with C55 adjustment. (thanks to
http://www.qsl.net/ve3mcf/elecraft_reflect/KAT2_Setup_C55.txt)

Now the next problem: after CALp, competed with RF-probe and
DMM, SWR reading is still very inaccurate. E.g. 1.4:1 at 25
Ohm instead of 2:1.

Have I to go for 2 dummy loads method (25 and 100 Ohm) or
can I investigate something before?