[Elecraft] List of tips

[David Cutter]

Both good sources, but a list of  "don't do this..."  as advised by John 
[K7SVV] might save a lot of headaches.  It would be an impossible task to 
make such a list from scratch, but if operators find things out the hard 
way, it might also lead to software changes.

David
G3UNA

----- Original Message ----- 
From: "David Ferrington, M0XDF" <M0XDF at Alphadene.co.uk>
To: "David Cutter" <d.cutter at ntlworld.com>; "Crafters" 
<elecraft at mailman.qth.net>
Sent: Friday, January 18, 2008 9:04 AM
Subject: Re: [Elecraft] List of tips


> Yes, or rather Wayne is maintaining a operating Tip page on Ecraft site 
> and
> zerobeat has LOTS of info, including error message tips and FAQ etc at
> http://www.zerobeat.net/mediawiki/index.php/Main_Page
>
>
> On 18/1/08 07:22, "David Cutter" <d.cutter at ntlworld.com> sent:
>
>> I hope someone is making a list of tips like this, they will be 
>> invaluable
>> for us all.
>>
>> David
>> G3UNA
>>
>> Subject: Re: [Elecraft] K3: Strange VFO Behavior
>>
>>
>>>  What ever you do, don't press the SPLT button to go into split  mode 
>>> when
>>> you have the condition you described because if you do, you will screw 
>>> up
>>> the band sequence when you step through the bands.  At one point I had 3
>>> 80m bands and no 60m and 40m when I cycled through the bands.  Until 
>>> Wayne
>>> gets it fixed, be careful to not have different bands in VFO A and B.
>>>
>>> John    [K7SVV]