[Elecraft] Entire System: Brand New K2, LOADED!!! XV50, Crystal Oven, Antennas.

[Dr. John W. Sloane]

Hello, everyone, and thanks for reading my offer.

I have recently been totally and permanently disabled, and find that I must
give up the new hobby that I just started in the fall.  I am a dentist
(was), and I have been a model builder and electronics kit builder for all
of my 55 years.  I have enjoyed the process of building all of the kits
listed here, and I can assure you that everything is done right.  The K2 and
all of its modules are tuned and aligned properly, and the 6 meter
transverter is left un-aligned, but all basic tests have been performed.  

All manuals for everything are included, of course.

I had some trouble getting the Tilt Bail Mounted, and it is not quite right. 
Whomever gets this beauty may want to replace the Tilt Bail, if you are
better at it yhan I am.  It's just a little bit off, and it is made of such
heavy wire that the paint cracked off in some areas from bending it into the
mounting area.  That said, it works just fine, and any issue with it at this
point is strictly cosmetic.

The entire list that I am presenting here is, of course, brand new, just
purchased from Elecraft in October, and at a few points in time thereafter,
so, of course, the K2 and XV60 are FLAWLESS, and I have a whole lot of extra
chassis screws going along with this deal.  The BUDDIPOLE kit is new, and
un-used, except for playing around with it a bit inside when it first
arrived.  The Buddistick Kit has been ouside in the weather for a few weeks,
and my schnauzer knocked over the chair I had it attached to, so the very
top section of the whip is broken off, but still fits into the rest of the
antenna and works fine.  These Buddipoles and Buddisticks are amazing.  VERY
high quality, and performance.  Nice folks, too, just like at Elecraft. 
Everything has all the latest firmware 

So here is what I've got, and the prices.  The prices are just the kit
prices.  The build fee for the K2 and all modules is:

$194.05, so: 

=====================>>>>>>>>>>>>>The price of the K2 complete outfit, with
K2, all modules, Microphone and Keys is $2,200.00 (no antenna-->>>>if you
want a REAL DEAL, I will include the Buddipole kit, listed below, and make
the package price $2,500, PLUS SHIPPING ("THERE ARE NO 'HANDLING
CHARGES'")<<<<<<<<<====================== 

===============>>>>>>>>>>>>>>>>>>The XV50 Transverter, with Crystal Oven
including all cables and build fee is $450.00.<<<<<<<<<<<<<<============

The Antenna stuff is ===============>>>>>>>>>>>>>>>>$499.00 and has extra
coax, coupler, converters, and a couple extra packs of coil clips.

By my reckoning, that makes the Whole, entire deal $3,149.00.

**************************************************************************************************************************
I WILL SELL EVERYTHING TO THE FIRST PERSON WHO CAN PAYPAL $3,100.00 TO:
drjohnsloane at earthlink.net. I WILL PICK UP THE UPS 

GROUND SHIPPING TO THE LOWER 48 UNITED STATES.  ALL OTHERS GET A $50.00
CREDIT TOWARD SHIPPING COSTS.  Please communicate 

via that email address.  >>>>>>>CHECK TO SEE IF IT'S STILL AVAILABLE BEFORE
PAYING! :)<<<<<<<<<<<<<
************************************************************************************************************************** 
K2 HF Transceiver:							629.00  

--------------------------------------------------------------------------------
K2 Options that are already installed and operational:
--------------------------------------------------------------------------------

KIO2 RS-232 Interface 						89.00 
KBT2 Internal Battery Kit 						69.00 
KSB2 SSB Option 							99.00  
K160RX 160M Option 						39.00  
BATT Replacement Battery 						30.00 
K60XV  60M and Transverter  Interface Option  				219.00 
KNB2 Noise Blanker 						39.00  
KDSP2 Advanced Internal DSP Filter / Clock / Clock 			229.00  
KAT2 20W Internal ATU 						169.00 
FDIMP Finger Dimple for K1 & K2  					6.00 
KXPD1 Plug-in Keyer Paddle 						69.00  
KXPD1-K2 Mounting bracket attaches KXPD1 to the K2 tilt bail.  		65.00
						SUB-TOTAL:	$1,751.00
--------------------------------------------------------------------------------
Microphone:
--------------------------------------------------------------------------------
  
MH2 Hand Microphone 						59.00    

--------------------------------------------------------------------------------
Gorgeous HexKey:
--------------------------------------------------------------------------------   
   
Elecraft Special Edition of the HexKey CW Paddle  			195.95  

--------------------------------------------------------------------------------
Antennas and Miscellaneous			Transceiver TOTAL:	$2,005.95
					BUILD FEE FOR K2, ALL MODULES:	  $194.05
				K2 with all modules, Microphone and Key	$2,200.00
-------------------------------------------------------------------------------- 



Deluxe Buddipole Antenna Pkg. (Incl. Tripod, mast, 25 ft coax, 6 clips)
399.00 
Deluxe Buddistick Vertical Pkg. with Clamp	(damaged)	 175.00/100.00 
						Total for Antennas:	$499.00

--------------------------------------------------------------------------------
6 Meter Transverter
--------------------------------------------------------------------------------  

XV50    6 Meter Transverter 						$369.00 
	(all cables and connectors for connection to 
	K2 are included). the IO Cable is composite, that is, 
	it is a single 
	cable for connetion to the traNSVERTER 
	as well as the computer.  

XVOVN  Crystal Oven for XV Series  					$45.00
					Build Fee:		$36.00
					Total for Transverter Outfit:	$450.00

 

-- 
View this message in context: http://www.nabble.com/Entire-System%3A-Brand-New-K2%2C-LOADED%21%21%21--XV50%2C-Crystal-Oven%2C-Antennas.-tp14767446p14767446.html
Sent from the Elecraft mailing list archive at Nabble.com.