[Elecraft] K3: CW delay is used when exiting XMIT mode manually

[Alexandr Kobranov]

correction - should be "as K3 is not on my table yet" in my last post...
so nervous about it that producing such mistakes :)


Alexandr Kobranov napsal(a):
> Hi John,
> sorry for question (as not on my table yet) - is this delay in any case 
> of CW mode or only when any kind of QSK is active?
> I suppose there is PTT mode for CW also and you are right that in such 
> case there is no reason for any delay. If you have QSK active, I can 
> understand that there is delay also with MOX using (without opinion if 
> this is bug or not - simply understand this :-)).
> Can you let me know if delay is also in PTT mode?
> thanks
> lexa, ok1dst
> 
> 
> John [K7SVV] napsal(a):
>> I should have mentioned that this happens in CW mode and not SSB mode.
>>
>> John    [K7SVV]
>> ----- Original Message ----- From: "John [K7SVV]" <k7svv at arrl.net>
>> To: "Elecraft Mail List" <elecraft at mailman.qth.net>
>> Sent: Friday, January 11, 2008 1:41 PM
>> Subject: [Elecraft] K3: CW delay is used when exiting XMIT mode manually
>>
>>
>>> I do not see the need for using the CW delay time when manually 
>>> exiting xmit mode when I press the XMIT button.  I would expect the 
>>> rig to return to receive mode as soon as the button is pressed.  If I 
>>> set the CW delay to zero, the return is instantaneous.  I admit that 
>>> I only rarely use the manual XMIT mode but I find it distracting when 
>>> I do.
>>>
>>> John    [K7SVV]
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>> http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>>
>>>
>>> -- 
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 
>>> 269.19.1/1219 - Release Date: 1/11/2008 10:19 AM
>>>
>>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft   Help: 
>> http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>