[Elecraft] NO audio - Remote Ham Radio Deluxe 3.5

[Alan D. Wilcox]

SOLUTION:
Loaded IP-Sound v0.57a (newest I could find) and it's running perfectly. 
(Listening to CHU at 7335 at the moment.)

I really like the K3's pseudo-stereo feature, so I'm doing the PCM 8kHz 
stereo codec. It reports using about 33 kB/s bandwidth on the LAN (which 
is wireless down to the radio).

Still yet to do: figure out HRD and how to do CW and PSK31 remotely.

http://xoomer.alice.it/ham-radio-manuals/IPS-v0.57a-Finale.zip is the 
IP-Sound that I used.

Alan

Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701 


K0PQar at msn.com wrote:
> Alan,
>
> I'm in EXACTLY the same situation as you are.  HRD is FB on my laptop via my LAN, but no audio is available. 
>
> If you get skype or some other audio program to work for you, I'd really appreciate hearing from you about how you got it to work via your LAN. I tried my best to get that done a few months ago, but finally decided I was wasting too much time in a fruitless effort even with some other hams who tried to help. 
>
> Thanks es 73,
>
> Steve Banks
> K0PQ
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "Alan D. Wilcox" <alan at wilcoxengineering.com>
>
> Date: Thu, 10 Jan 2008 20:35:32 
> To:elecraft <elecraft at mailman.qth.net>
> Subject: [Elecraft] NO audio - Remote Ham Radio Deluxe 3.5
>
>
> Hello,
> HRD runs fine remotely over my LAN. The host (server) PC is connected 
> (via COM1) to the K3.
> But ...
> Minor detail escapes me: the K3 audio isn't getting to me at the remote PC.
>
> Audio output from the K3 goes into the host PC sound card, then comes 
> out to a couple speakers local to the K3. I would assume that the HRD 
> remote server would pickup that audio and ship it out over the LAN to be 
> streamed to my remote PC along with the HRD display. Seeing the radio 
> remotely is nice I suppose, but not much good if I can't hear it!
>
> I'm not too familiar with HRD yet, so I'm sure this is a simple option 
> or setting I'm missing. Didn't see anything in the help file.
>
> Thanks for insight,
> Alan
>
>