[Elecraft] K3 phantom power

[Darwin, Keith]

Bob & others, 

I think the easiest way to get 48 VDC phantom power for a "real" mic is
to put a small mixing board or mic preamp between the mic and rig.  I
have a (yuck, spit) Behringer board that cost me $100 about 10 yrs ago
that provides phantom power on 4 channels plus some EQ and, of course,
mixing capabilities.  Or I can use my Mackie board to do the same.
That's how I run good mic into my rig.  If you don't want a mixer, you
can get several different mic preamps that will provide the phantom
voltage the mic needs.

- Keith N1AS -
- K2 5411.ssb.100 -
- K3 Wave 3 -

-----Original Message-----
> Would it be possible for the K3 to provide 48volt "Phantom" power for 
> profesional condensor microphones?
> Thanks!