[Elecraft] RTTY and filters

[Tom]

Depends on what you are up to.

For S and P with a soundcard 200 Hz sounds to tight.
The signals have a 170Hz shift and many stations still work with a 200 Hz Shift.

I used the standard filter narrowed down to aprox 700 Hz. Was OK for me
When some qrm comes up, switching to the 400 Hz filter 

For Cq-ing your qso partner have to be exact on QRG with the 200 Hz filter but eliminates all others..
It is a matter of what are you looking for..

73 de Tom
HB9DOD KL5X
-------- Original-Nachricht --------
> Datum: Mon, 07 Jan 2008 11:28:33 -0700
> Von: Mike Fatchett W0MU <w0mu at w0mu.com>
> An: Elecraft Discussion List <elecraft at mailman.qth.net>
> Betreff: [Elecraft] RTTY and filters

> I previously mentioned in an email to the group that I was looking forward
> to trying out the 200hz filter in my K3 for RTTY contesting.  I had one
> reply wondering if that filter was going to be too tight for RTTY.
> 
> Any comments from the group on this.
> 
> The other person that emailed was planning on using the 400hz filter.
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger?did=10