[Elecraft] K2 CW audio equalization

[Don Wilhelm]

Joe,

I believe that would have to be done with the IF filter alignment CAL 
FIL.  With Spectrogram or similar, you can observe not only the center 
of the passband, but you can compare the filter slopes.  There will be 
some difference between the upper and lower slopes, especially at wider 
bandwidth settings, but you should be able to achieve an acceptable 
compromise.

73,
Don W3FPR

Joseph Trombino Jr wrote:
> I recall there being a way to equalize the K2 audio response between 
> NORMAL and REVERSE in the CW mode but can't for the life of me 
> remember what the tuning procedure was.
>
> Can some kind soul point me in the right direction to the above 
> procedure???
>
>                                73, Joe W2KJ
>                                I QRP, therefore I am
>