[Elecraft] K3 - Indicated Signal Level

[Greg - AB7R]

This option is on the list and would likely be something you could turn on and 
off.  But it will likely be awhile before you see it.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009 and 0319

On Fri Feb 29 11:57 , "Mike Harris"  sent:

>G'day,
>
>In the a review of SDR receivers in the March 2008 RadCom (RSGB Magazine) 
>is the following:
>
>"the indicated signal level does not vary with the 
>attenuator/gain/preselector setting.  To achieve this the control program 
>keeps track of the gains and losses in the signal chain and always 
>displays the exact signal level in dBm...."
>
>I would certainly like my K3 to display an S-meter reading independent of 
>ATT or PRE selection.  This would go some way to making S-meter reports 
>more meaningful.  Currently switching on the attenuator, for example, 
>reduces the other guys setup from a beam and kW amp to 100W and a dipole.
>
>Regards,
>
>Mike VP8NO 
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com