[Elecraft] K1-4 KAT1: No voltage during SWR bridge adjustment of C9

[KB3OKS - Mark]

Looks like the problem was the simplest -- I just wasn't in transmit. Sheesh.
But better late than never, I suppose. Thanks again for your time, Don ...
73,

Mark / KB3OKS


KB3OKS - Mark wrote:
> 
> 
> I checked out T1 but I'll triple check it this evening, and I'll also test
> the diodes with my DMM since I'm certain of their orientation on the
> board.
> 
> 
> Don Wilhelm wrote:
>> 
>> You did try the measurement during transmit did you not?
>> 
>> Check the orientation of the diodes, and check T1 for correct 
>> connections and good tinning of the leads -
>> 
>> You may want to test the diodes for forward and reverse resistances with 
>> 
> 
> 

-- 
View this message in context: http://www.nabble.com/K1-4-KAT1%3A-No-voltage-during-SWR-bridge-adjustment-of-C9-tp15713755p15728079.html
Sent from the Elecraft mailing list archive at Nabble.com.