[Elecraft] [K2] [KAT2]

[Kevin Cozens]

Kristina Wright wrote:
> So I pulled it apart, checked everything, and reflowed T1. Now I'm 
> trying to adjust C55 again, but I can't seem to get it to go to the ATU 
> when I press TUNE. It flashes ATU briefly, then says Hi Cur, then goes 
> to P 4.3 or so.

Some simple things to check are that you have a proper 50-ohm termination on 
the antenna 1 connection of the KAT2. Check that you haven't accidentally 
selected antenna 2 while the dummy load is on antenna 1. You can work around 
the high current warning by reducing power to about 1 watt or so until you get 
the adjustment close to where it needs to be.

-- 
Cheers!

Kevin.

http://www.ve3syb.ca/           |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172      |"Same thing we always do, Pinkutus:
                                 |  Try to assimilate the world!"
#include <disclaimer/favourite> |              -Pinkutus & the Borg