[Elecraft] FS: KSB2 SSB Adapter & KIO2 I/O Module * Important *

[Gary Hvizdak]

At 17:44:32 EST on Sun 24  Feb 2008 Rich Lentz (KE0X) wrote …

... The KSB2 will require J9, J10, and J11 to be installed on the K2
motherboard.  Mine are still installed in the K2.  They are available from
Elecraft or Digi-Key.  1 - Samtec SSW-112-01-G-S and 2 - Samtec
SSW-103-01-G-S.

--

Please note that installing the KSB2 also requires the installation of
several parts on the Front Panel board ...

o   Resistor, 68.1 k, 1%, 1/4 W 
o   (5) Capacitors, .01 uF, 0.2" (5 mm) 
o   Connector, 2 x 8 pin male, .100" 
o   Resistor network, 10 k, 4 R, 8 pins 
o   Transistor, PNP, 2N3906 

All of these parts are available in kit form from http://www.unpcbs.com/ as
our KSB2 Parts kit ($6.25 + $5.50 shipping & handling).  This kit also
includes the three RF board connectors Rich mentions, plus the standoff and
miscellaneous mounting hardware.

73,
Gary  KI4GGX