[Elecraft] K3 - KUSB problem

[G3SJJ]

Wow, that did it Don. Thanks.

Chris G3SJJ


Don Wilhelm wrote:
> Chris,
>
> You might try setting the data rate higher.  For some strange reason 
> the USB to serial adapters have more trouble working with slow data 
> rates.
>
> 73,
> Don W3FPR
>
> G3SJJ wrote:
>> I am unable to get my K3 talking to either my laptop or my PC using 
>> the KUSB serial adapter. It is probably something I am or am not 
>> doing! The K3 interfaces perfectly well with my PC on standard Comm1 
>> serial port and works with Logger32 general logger and N1MM contest 
>> logger, as well as downloading firmware updates.
>>
>> I have updated the driver to the latest one as recommended. I have 
>> selected 4800 on the K3, plus 8N1 4800 on each computer and the 
>> logging programs. The port number is the same and I have tried other 
>> ports also. Some Virtual Ports are set by mHam Router and I have 
>> avoided these. In Device Manager I can see "Proloific USB-to-Serial 
>> Comm Port and it indicates everything is working OK.
>>
>> Not sure where to go from here. Any ideas?
>>
>> Chris G3SJJ
>>
>