[Elecraft] No FSK

[Greg - AB7R]

Roger - K8RS

Hi Roger,

You can not, and never could, send FSK when Data is set to Data-A.  You need to 
HOLD the Data MD button and then select FSK-D, not Data-A.  Data-A should be used 
for audio based data modes like PSK (if not using PSK-D), SSTV, MFSK...etc.

Don't forget to set your pitch to match what MMTTY is using.  Do this with the same 
PITCH control you use when in CW mode.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009 and 0319

On Thu Feb 21 10:56 , "Roger Stimson"  sent:

>Group,
>          After the recent firmware update I am no longer able to send or receive 
RTTY.  A few weeks ago I experimented with WriteLog and RTTY with excellent 
results.  Now I cannot generate any RTTY output nor receive RTTY in Data Mode A.  
What is going on?  I am using the same setup I used a few weeks ago: FSK input to 
pin 1 of the AUX/IN jack along with PTT IN. WriteLog looks like it is generating 
the FSK,  i.e. the MMTTY display is giving me the two ellipses.   Everything seems 
normal on CW and SSB.
>                                                      Roger K8RS
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com