[Elecraft] K3 with Microkeyer2

[Dick Dievendorff]

I'll get this info into the K3 Utility Help in the very near future.  

Dick, K6KR



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Subich, W4TV
Sent: Thursday, February 21, 2008 7:19 AM
To: 'John Gaynard'; elecraft at mailman.qth.net
Subject: RE: [Elecraft] K3 with Microkeyer2


> Can the Microkeyer II USB interface be used to upload 
> firmware upgrades with the K3?

Yes.  However you must first open Router and set the Radio 
type (Radio Port | Set) to "None" or check "Disable router 
queries" to prevent Router from trying to poll the radio 
during the upload.  

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support at microham.com 
 




> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Gaynard
> Sent: Thursday, February 21, 2008 12:43 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 with Microkeyer2
> 
> 
> Can the Microkeyer II USB interface be used to upload 
> firmware upgrades with
> the K3?
> 
> John K8WDN
> K3  S/N #157
> 

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com