[Elecraft] K3 with Microkeyer2

[Joe Subich, W4TV]

> Well, I couldn't use the DigiKeyer on a Mac - I think the 
> software may need to treat it slightly differently than 
> just a plain RS232.

The radio control port on DigiKeyer is implemented through 
an external microcontroller.  For Windows, Router implements 
a virtual port.  However, there is no equivalent for Router
for OS 10 systems; Kok Chen (uH Router/cocoaModem) and Don 
Agro (MLDX) interface directly to the microcontroller for 
radio control with all of the microHAM interfaces (except 
USB Interface II).

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support at microham.com 
   



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of David 
> Ferrington, M0XDF
> Sent: Thursday, February 21, 2008 4:15 AM
> To: John Gaynard; Crafters
> Subject: Re: [Elecraft] K3 with Microkeyer2
> 
> 
> Well, I couldn't use the DigiKeyer on a Mac - I think the 
> software may need
> to treat it slightly differently than just a plain RS232.
> 
> David Fleming said he might consider looking into it if 
> enough people needed
> it.
> 
> I just bought the KUSB along with the K3 and that works great 
> - its not much
> of a pain to switch the connections, when I want to do the update.
> 
> 
> On 21/02/2008 05:43, "John Gaynard" <jgaynard at columbus.rr.com> sent:
> 
> > Can the Microkeyer II USB interface be used to upload 
> firmware upgrades with
> > the K3?
> > 
> > John K8WDN
> > K3  S/N #157
> -- 
> Everything secret degenerates, even the administration of 
> justice; nothing
> is safe that does not show how it can bear discussion and publicity.
> -Lord Acton, historian (1834-1902)
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com