[Elecraft] K3 antenna jacks

[Ken Kopp]

Yes Jim, Type N's will work fine.  The pigtails are just 
stranded wire about 3" or so long with a male pin that
plugs into the antenna tuner module.

However, I've used BNC's on mine.  Oak Hills Research
sells a 2-pack with beautiful adapter plates for $7.50.  His
part number is OP-SB2.

73! Ken Kopp - K0PP
       K3 #56
       K2 #5665
       ElecraftCovers at rfwave.net
       or
       k0pp at rfwave.net