[Elecraft] Best way to secure RF ground from 2nd floor?

[dlajr at bellsouth.net]

> > Here is a solution from a very old QST,
> 
> It's not from QST.
> 
>  and all I can say is it works 
> > 
> > for me. My shack is on the 2nd floor and I run several rigs w/ amps . I 
> > was having RF everywhere until I tried this:
> > - Run coax ( RG-8 or similar) from rig to a  real  good ground . Put a 
> > .01 cap across the shield and center conductor at both ends. Cap needs 
> > to be 2KV or better. You will be using the center conductor as your 
> > connection to rig and the ground rod.You should also use an ATU as 
> > mentioned in an earlier reply.

If it is not from QST, do you know where it is from?  Do you know where (or how) I can get a reprint of it?  My shack is on the second floor, too.

And I believe that The Wireman used to sell a kit containing the capacitors!

Dan Allen
KB4ZVM
K2 S/N 1757