[Elecraft] K3 Equalization Memories - Missing?

[Ian J Maude]

WB6MND wrote:
> But unless I've missed something, there are no memories for the K3 TX and RX
> Equalization settings.  Is that correct?
>   
I was kind of hoping that the EQ settings were saved when you save a 
config?  Having a licensed XYL it would be handy to save 2 configs, one 
for me and one for her.  Of course the settings would be different for 
each of us.

73 Ian
> It would be extremely helplful to have such memories.
>
> For example:
>
> I would like one Rcv Eq setting for weak CW signals, where I kick up 400 hz
> +10 db or so and drop the other eq bands.  This would help me pull the weak
> CW sigs out of the noise better.  Obviously this setting would not be used
> for SSB or strong CW sigs, where I'd want a flatter eq curve.
>
> I'd like one Tx Eq setting for local ragchew work, maximizing bandwidth and
> freq response for best audio quality.  Obviously, this setting would not be
> good for DX.  For DX, I'd want more punch where the midrange is kicked up
> and the freq extremes are diminished.
>
> Having several eq memories would allow this flexibility.  As it is, each set
> of eq curves for different purposes must be manually entered.  That's
> awkward and time consuming.
>
> If I've missed something and this feature already exists - great.  If it
> doesn't, it would be nice to have it.
>
> Les 
> WB6MND
> Bay Area, California
>
>   


-- 

Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?