[Elecraft] K2 Problem

[Ron Polityka]

Hi,

 I figured out what I did wrong. When I went to send a CW stored message in 
the #7 position I did not hit the button #9 and I held in the button #7 too 
long.

Thus it switched between the C and F.

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392


----- Original Message ----- 
From: "Ron Polityka" <wb3aal at verizon.net>
To: ".Elecraft" <elecraft at mailman.qth.net>
Sent: Saturday, February 16, 2008 2:38 PM
Subject: [Elecraft] K2 Problem


> Hello,
>
> Today I push a sequence of buttons and I was not sure on what I pushed and 
> in what order.
>
> My display in the CW mode will have the frequency but the c flashes to a F 
> and back to a c.
>
> Any ideas?
>
> 72 and Thanks,
> Ron Polityka
> WB3AAL
> www.wb3aal.com
> www.n3epa.org/
>
> K1 - SN 01011
> K2 - SN 01392
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com