[Elecraft] Decode 1 signal only

[Charles Harpole]

Many DX load a set of memory freqs. spread over their announced listening spread and then punch the memory button after each contact, insuring that the DX will not hear a second caller on the same freq.  73Charles Harpolek4vud at hotmail.com > Date: Thu, 14 Feb 2008 14:54:46 -0800> From: julian.g4ilo at gmail.com> To: elecraft at mailman.qth.net> Subject: Re: [Elecraft] Decode 1 signal only> > > > Greg - AB7R wrote:> > > > I havn't used it yet. But it seems to work on the audio output from the> > radio. If > > > > that's the case it seems it would only decode signals that are in your RX> > filter BW. > > > > Isolating the signal you want and narrowing down the filter should give> > you what you > > > > are looking for....I think. :) > > > There is a two page write up on this program in the latest RadCom, arrived> today. One of the things it mentioned is that the program apparently doesn't> work well if any filtering is used. It wants a wide band input taken from> the IF, not a regular audio output, or its decoding abilities suffer. Don't> ask me why.> > It's most depressing, reading how the software helped the author spot the> exact frequency that successful callers were using, so he could call on the> same frequency and make a contact with the DX right away, while others> without the software, unable to spot the exact frequency to call on, went> unanswered. A key skill that allowed the less well equipped station to get> an advantage over those with more power but less operating prowess, has been> wiped out by a bit of shareware. :(> > (To forestall a possible deluge of requests for copies of the article, sorry> but I don't posssess a scanner, even if I was willing the RSGB's copyright.)> > -----> Julian, G4ILO K3 s/n: 222 K2 s/n: 392> G4ILO's Shack: www.g4ilo.com> Zerobeat Ham Forums: www.zerobeat.net/smf> -- > View this message in context: http://www.nabble.com/Decode-1-signal-only-tp15473995p15491147.html> Sent from the Elecraft mailing list archive at Nabble.com.> > _______________________________________________> Elecraft mailing list> Post to: Elecraft at mailman.qth.net> You must be a subscriber to post to the list.> Subscriber Info (Addr. Change, sub, unsub etc.):> http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm> Elecraft web page: http://www.elecraft.com