[Elecraft] K3 #379 minor stumble

[BigAlT]

Per an earlier post by Greg AB7R, try to calibrate on one of the 60 Meter
channels such as 5403.5 kHz.
 Al
 WB6HPF

Michael E. Dobson wrote:
> 
> I've run into a minor glitch in the assembly of K3 #379.  I made it 
> up to the point of doing the 5W Transmitter Gain calibration without 
> a problem.  That went fine on every band but 60M, there I get no more 
> than 0.4W and a ERR TxG message when I exit Tune.  The installation 
> of the 100W amp and the final steps are on hold until I hear back 
> from K3support which means using the K3 in the ARRL CW contest this 
> weekend is very much in doubt.
> 
> On the other hand, while waiting for a reply I snagged VP6DX on 17M 
> at about 22:55Z with my trusty K2 for my first QSO with them.
> 
> 73,
> Mike WA3KYY
> K2 #2221
> K3 #379
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> 

-- 
View this message in context: http://www.nabble.com/K3--379-minor-stumble-tp15491817p15491917.html
Sent from the Elecraft mailing list archive at Nabble.com.