[Elecraft] mics (D-104)

[David Pratt]

In a recent message, Don Rasmussen <wb8yqj at yahoo.com> wrote ...
>Has anyone connected a preamplified D104 to either the
>front or rear panel? Are there any added parts
>required?

I have been using the D-104 (with base pre-amp) on my K3 for several 
weeks with some success.  However, there is an issue of which Eric is 
aware....  Transients produced when the mic switch is pressed cause a 
delay in the build-up of the audio.  A workaround is to increase 
compression.  With compression set at zero there is a problem, otherwise 
it can take several seconds for the audio to build up. The first few 
words of an over can thus be missed.

There isn't a problem with the K2; the D-104 works fine.

73
-- 
David G4DMP
Leeds, England, UK
------