[Elecraft] K1: Inp Menu Item Pdn Only Allows Dits

[MGFoster]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I changed my Inp from Pdn to Hnd to test out my hand key.  When I
changed back to Pdn only the Dits side responds.  The Dah side doesn't
produce anything (yes, the paddle works outside the K1).

While in Hnd mode I plugged in my hand key with a mono jack.  When the
key was closed a continuous tone was generated.  I figured out that the
mono jack was shorting the ground and Dah poles in the stereo jack, thus
producing the continuous tone.  So I changed the Inp menu item back to
Pdn while I assembled a stereo jack for the hand key.  That's when I
discovered the paddle's Dah was not recognized.  Could I have shorted
something in the keyer circuit?

Thanks,
-- 
MGFoster:::mgf00 <at> earthlink <decimal-point> net
Oakland, CA (USA)
KI6OFN
-----BEGIN PGP SIGNATURE-----
Version: PGP for Personal Privacy 5.0
Charset: noconv

iQA/AwUBR7Nn+oechKqOuFEgEQJ/4wCg+yLTr3FbhzGbpzfwC8Mfq/BSSgwAnRZR
eirQ47YDhKToathlI3fbRDQq
=UgXd
-----END PGP SIGNATURE-----