[Elecraft] K3: Interim Build Report

[Greg]

Just a tip....when making adjustments to either the RX or TX EQ, if you want
to reset them to 0 dB, press the CLR button normally used for RIT control.
It will reset all the EQ settings to 0 dB and you can start from scratch.

73
Greg
AB7R


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of David Ferrington,
M0XDF
Sent: Sunday, February 10, 2008 1:09 AM
To: Crafters
Subject: Re: [Elecraft] K3: Interim Build Report


I couldn't possibly tell you if my K3s SSB was punchy etc. I don't have
enough operating experience (4 yrs operating, with just an FT-857 before the
K3, what a great radio for an inexperienced op).

I can tell you everyone who hears it, says it is GREAT audio and better than
the K2, normally they say best they have ever heard. And I haven't even
tried using the Tx equaliser yet.

I will also say that my operating had tailed off over the last year,
conditions down,  high noise floor at this QTH we not encouraging and FT-857
is not an ideal base rig - too many menus and 'hold this, push that, turn
this and push that again'.

The K3 changed all that, turned me around if you like and I'm getting back
into the spirit.


On 9/2/08 23:40, "mark roz" <anegadasail at yahoo.com> sent:

> Dave,
>
> My K3 arrived with all the parts.
>
> SSB:
>
> There were many postings about SSB mode (including
> mine).
> Some how, there was no response from Elecraft about
> this.
> I have many friends in EU who are waiting for that
> DX/Contest audio from K3 before they decide to order
> one.
> I don't understand why Elecraft is not responding to
> this issue. I just would like to know that Elecraft
> has intention to improve SSB mode.
> 73 Mark WQ7X
--
What is the purpose of the giant sequoia tree? The purpose of the giant
sequoia tree is to provide shade for the tiny titmouse.
-Edward Abbey, naturalist and author (1927-1989)


_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com