[Elecraft] K2 - hang up problem

[Gary Hvizdak]

On Fri 1 Feb 2008 at 22:24:43 EST Tony Kazmakites (N2TK) wrote ...

Supply voltage is 13.0V as it has  been since I put together the K2. At 1W
out the voltage is at 13.0. At 100W out the voltage is 12.8V. The rig hangs
up at all power levels.

Serial #3481. It has been working fine for over 4 years.

--

Tony,

    More questions ...

1) Aside from the KPA100 and KSB2, what other options do you have?  Is your
KPA100 remoted?

2) Does this behavior also occur in CW mode or just SSB?

3) Have you discovered any additional symptoms or any other ways to clear
the problem, beyond what you originally mentioned?

4) Very briefly describe your antenna system including tuners.  Has anything
about your antenna system changed recently?  (Given your problem description
this probably doesn't have anything to do with it.)

5) Do you have a cat?  (They have been known to pee on equipment and to chew
on cables.)

73,
Gary  KI4GGX