[Elecraft] [K3] Unable to save configuration, beta 2.34

[Dick Dievendorff]

This generally indicates a marginal communications path. If you're using a
USB to Serial Adapter, try changing the K3's RS-232 rate to 38,400 and try
again.  It's counterintuitive, but sometimes the higher data rates work
better.

The K3 Utility issues a series of commands and is carefully analyzing the
response's format.  If the response comes back in other than the expected
format, after some number of retries the save is abandoned with this error
indication.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike Scott
Sent: Sunday, August 31, 2008 6:31 AM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] [K3] Unable to save configuration, beta 2.34

I am running K3 beta 2.34 / 1.89 and I am unable to save a K3 configuration.
I receive the following save configuration error:

Configuration was not saved.
The configuration file is incomplete, and man not be used for restore.

Is this a bug or is there something I need to do to make it work?

Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1  #1311


_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com