[Elecraft] K3 SSB on 40M

[Jack Regan]

This sounds like exactly the same problem I had. Upgrading from 2.22 to 2.23
solved the problem. Worked fine on cw, and on USB bands but on 40/80 LSB no
HP output and next to nothing on LP.

I should note that after upgrading the LSB HP problem was fixed but an ATU
problem appeared. Redoing the 5 and 50 watt calibration and then the TXMTR
GAIN calibration on all bands got the rig to %100 functionality.

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of WA6L
Sent: Thursday, August 28, 2008 3:32 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 SSB on 40M

Jack, AE6GC



It has been in Aptos for two weeks now.   :-(

We will see . . .


Nick G3RWF wrote:
> 
> Appears to be just 40M. Did you solve your prob? 73 Nick
> 
> WA6L wrote:
>> 
>> 
>> I had a similar problem with SSB from 30m through 160m.  Is your low
>> output only on 40?
>> 
>> 73,
>> 
>> John, WA6L
>> 
>> 
>> 
>> Nick Henwood wrote:
>>> 
>>> Can't get proper output on 40M SSB. Rig works fine on all other bands.
>>> On 40M gives full output on CW but when switched to SSB although the
>>> Comp and ALC readings are OK (i.e.as for all other bands) but there is
>>> very little RF output. Can't think of anything which is specific to 40M
>>> which I have switched on or off. Any ideas please (I don't use SSB
>>> much!)?
>>> 73 Nick G3RWF
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>> 
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>> 
>>> 
>> 
>> 
> 
> 

-- 
View this message in context:
http://n2.nabble.com/K3-SSB-on-40M-tp790785p790858.html
Sent from the Elecraft mailing list archive at Nabble.com.

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com