[Elecraft] K3 SSB on 40M

[Greg - AB7R]

Nick,

Do you have  your CONFIG menu set for per band power?  Try turning that off and see 
if the problem persists.



-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Thu Aug 28 15:07 , Nick G3RWF  sent:

>
>Appears to be just 40M. Did you solve your prob? 73 Nick
>
>WA6L wrote:
>> 
>> 
>> I had a similar problem with SSB from 30m through 160m.  Is your low
>> output only on 40?
>> 
>> 73,
>> 
>> John, WA6L
>> 
>> 
>> 
>> Nick Henwood wrote:
>>> 
>>> Can't get proper output on 40M SSB. Rig works fine on all other bands. On
>>> 40M gives full output on CW but when switched to SSB although the Comp
>>> and ALC readings are OK (i.e.as for all other bands) but there is very
>>> little RF output. Can't think of anything which is specific to 40M which
>>> I have switched on or off. Any ideas please (I don't use SSB much!)?
>>> 73 Nick G3RWF
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>> 
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>> 
>>> 
>> 
>> 
>
>-- 
>View this message in context: http://n2.nabble.com/K3-SSB-on-40M-
tp790785p790815.html
>Sent from the Elecraft mailing list archive at Nabble.com.
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com