[Elecraft] Prospective K3 Owner

[Jack Smith]

I'll second Doug's  recommendation of these screwdrivers. I bought a set 
of both Phillips and PoziDrive from McMaster-Carr and won't use anything 
else now. They are not cheap, but good tools are an investment.

If you work on HP test gear, you'll want a PoziDrive set as they are 
used extensively. (Pozidrive screw heads can be identified by the lines 
scribed between recesses.) You can use a standard Phillips screwdriver 
with Pozidrive screws but it's not a good idea as you will sooner or 
later damage the recesses.

Jack K8ZOA
>
> Err, Wiha makes anti-cam Phillips drivers that work well.
> I got mine from McMaster-Carr.
>
>