[Elecraft] K3 Utility RS-232 ComPort4

[Dick Dievendorff]

The K3 Utility gets its inventory of COM ports from the registry.  See

HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM

When a serial port device driver installs a COM device, it's supposed to
make this registry entry.  That's what we're looking for.

Dick, K6KR





-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave W7DPW
Sent: Monday, August 25, 2008 5:32 PM
To: k3
Subject: [Elecraft] K3 Utility RS-232 ComPort4

I just now have gotten around to downloading the K3 Utility and have it
installed on my 98SE machine. I have a USB to RS-232 converter on it
shows in my system menu as COM4 but it will not appear in the selection
menu of the K3 Utility. Only COM1, COM2, COM5, and COM6 appear on the K3
Utility PullDown Menu and they are used for other applications.

I know COM4 works as I use it with WriteLog and that application will
communicate with the K3 without problems. I have the K3 RS-232 set to
9600...

Any suggestions ?

My K3 s/n 1299. FWV 2.21

Dave W7DPW




David J Drew  --  W7DPW
Over 50 Years with Same Call
Amateur Extra Since 1970
Continuous ARRL Member Since October 1957
ARRL Life Member October 1969
Vancouver, Washington  98664-4445




_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com