[Elecraft] Using K2/100 on QRP

[Don Wilhelm]

Ken,

No need to change anything, just unplug the cables and go.
OTOH, if you are running on a small battery and want to extend its life 
as long as possible, there are some menu settings like GRAPH=BAR and 
OPT=PERF that can be changed to minimize current draw - those do not 
have to be changed, but under some conditions, you may want to.

73,
Don W3FPR

Kenneth Moorman wrote:
> I have the K2/100 with the KPA100 and KAT100 mounted in the separate EC2
> enclosure.  I would like to use the K2/10 in a portable situation
> independently, leaving the 100 watt components here in the shack.  I have no
> concern with the uncabling part of the operation, but I am wondering if
> there is some menu item(s) I must reset after getting the K2/10 separated
> from its high-powered components.  This is the first time I have
> contemplated such operation since obtaining the amp/tuner about 18 months
> ago, and I can't remember what if anything I did to the menu items to get
> both "boxes" working together.  I feel sure that this has been done by many
> folks who can quickly set me on the right path.  Thanks.
>