[Elecraft] K3 Buffer Mod

[Jim Cox]

It sounds like Tony should leave the K3 as is.   Dont screw it up unless 
your qualified to make the mods.   Jim K4JAF


----- Original Message ----- 
From: "Don Rasmussen" <wb8yqj at yahoo.com>
To: <elecraft at mailman.qth.net>
Sent: Thursday, August 21, 2008 7:06 PM
Subject: [Elecraft] K3 Buffer Mod


> Tony,
>
> I have the LP-Pan with recommended Creative Labs E-MU
> 0202 and find this to be optimal, I mean no reason to
> make a mod of any type to K3. If someone told you that
> this must be done, I'd want to see why with my own
> eyes before doing this job.
>
> IMO (in my opinion) you don't "work" with SMD on K3,
> they fly around like little fleas even if you use a
> pair of 15w irons to remove them. They are just that
> small. But you can get them off without any major
> damage, find them, and carefully replace them - *when
> necessary*. YMMV...
>
> de wb8yqj
>
> Previous message: [Elecraft] K3 Buffer Mod
> Next message: [Elecraft] K2/100 LOCKUP THOUGHTS?
>
>
> Should I expect any negative impacts if I used
> regular resistors in place
> of SM resistors for this mod?
>
> N2TK, Tony
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com