[Elecraft] K3 WATTMETER ADJ

[Greg - AB7R]

Tony,

Do you have TUN PWR set for 10W instead of NOR?  If so, no matter what you set PWR 
at, TUN will process at 10W (or whatever you have TUN PWR set to).


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Wed Aug 20 14:00 , K2ZLS  sent:

>   K3  v2.23  Wattmeter adjustment doesn't  follow the manual.   I'm 
>wondering if I missed something and maybe someone can help me out with 
>this one.    I tried to re-check the wattmeter calibration that I 
>skipped over during the build #703 and I'm set up on page 47 of the new 
>manual Rev D1 7/27/08 on 20 mtrs with CONFIG: WMTR   LP   070   and have 
>the power control set at 5.0 watts.   When I press TUNE  it shows  10.0 
>watts and the power out is indeed 10.0 watts according to my 
>wattmeter.     Using the same procedure at 50 watts the  CONFIG: WMTR  
>HP  100   and the power control set to 50.0 watts,  the TUNE shows  
>AGAIN  10.0  watts and is 10.0 watts.
>
>     I  looked at errata sheet and there is no changes.  Could this be a 
>TYPO.    WHAT AM I MISSING??   TNX
>
>73's  Tony   K2ZLS
>
>
>
>  
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com