[Elecraft] K3 crystal offsets, K3 #1546

[Dick Dievendorff]

It's on page 74 of the owner's manual, in the Crystal Filter Installation
Appendix.

5-pole filters have a FREQ OFFSET marked on the side of one of the crystals,
e.g. “-0.85”. 

The offset for all 8-pole filters is 0.00.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Kenneth Waites
Sent: Monday, August 18, 2008 6:13 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 crystal offsets, K3 #1546

I received 5 xtals with my k3 which I am assembling.
Two had offsets marked on the side, these were the elecraft 2.7 and .2.
Three from Inrad (1.8, 1, and  .4) did not have a sticker with offset on
them.
Maybe these did not go thru the test at elecraft?  Do xtals always come with
that white sticker on them if they have been properly tested?

Ken K5WK
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com