[Elecraft] Re: Software Upgrades

[Stephen Prior]

You are right David,

The power output indication (in the VFO B area) changes but the actual power
out as indicated on the K3 does not.  Furthermore, if I go below 12W such
that the QRO PA goes out of circuit, the actual power will drop (not sure
what to) and will not return to 20W when I increase it.

Apologies for my rather 'blanket' dismissal of your observation!

73 Stephen G4SJP


On 17/08/2008 21:34, "Dave G4AON" <elecraft at astromag.co.uk> wrote:

> Stephen
> 
> Try, DATA A, audio into K3 via line input, RTTY (or any similar audio
> data mode), set power to 20 Watts, go to TX and try to turn up the power
> while transmitting. Nothing happens, the power remains at 20W.
> 
> 73 Dave, G4AON
> K3/100 #80, f/w 2.23
> 
> I quite agree David, but I'm surprised that you are saying that the TX power
> cannot be changed whilst transmitting, because I certainly can do that on
> all modes so far as I can see with the latest beta that you have.
> 
> 73 Stephen G4SJP
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>