[Elecraft] KRX3 is deaf

[Brendan Minish]

Check very carefully for dry jointed torrioid leads on the subout board 

73
Brendan EI6IZ 



On Sat, 2008-08-16 at 13:24 -0400, Roger wrote:
> Group,
>              What haven't I done?  My KRX3 is deaf!
> 
>               Here is the story.  After installing the KRX3 and checking to see if all pins and cables were properly seated, I went thru the CONFIG steps and downloaded the latest firmware, FPF and DSP1 & DSP2.  Loading was successful. I activated my 2 SUB Filers (2.8 kHz & 400 Hz. But no audio!.  
>                
>               What have I missed?  Where should I look next?  I did remove the hard wired W4 jumper.
>               
>               Roger K8RS K3 #280

-- 
Don‘t complain. Nobody will understand. Or care. And certainly don‘t try
to fix the situation yourself. It‘s dangerous. Leave it to a highly
untrained, unqualified, expendable professional.