[Elecraft] Re: K3 KRX3 - BNC or KAT3?

[Vic K2VCO]

David Ferrington, M0XDF wrote:
> Thanks David - helps if you RTFM. You haven't found any problems with 
> the TMP lead from the KAT3 then? I wondered if there might be some stray 
> RF pickup.

I used the BNC, so I simply disconnected the KAT3 cable from both ends 
and coiled it up. I placed a bent solder lug under one of the 
thumbscrews on top of the KRX3 and used it to hold the cable in place in 
case I wanted it in the future.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco