[Elecraft] K3 KRX3 - BNC or KAT3?

[David Ferrington, M0XDF]

I too would like to know this for same reason.
Not sure how best to configure this
--  
Patience serves as a protection against wrongs as clothes do against  
cold.
For if you put on more clothes as the cold increases, it will have no  
power to hurt you.
So in like manner you must grow in patience when you meet with great  
wrongs,
and they will then be powerless to vex your mind.
-Leonardo da Vinci,  painter, engineer, musician, and scientist  
(1452-1519)

On 13 Aug 2008, at 17:15, N2TK wrote:

>
> I think this was addressed before with not having the KAT3. I do  
> have the
> KAT3. Is it recommended to hook up the  BNC connector on the back to  
> the
> KRX3 or to use the second SO-239 on the K3 or does it make any  
> difference?
>
> Most of the time I will be using the same antenna for both  
> receivers. When
> the K3 has the capability of having the two receivers on two  
> different bands
> I would like to monitor another band with a second antenna. An  
> example would
> be to monitor 6M. Figured I could use the second SO-239 for this.
>
> I assume that when I am listening to both receivers on the same band  
> that if
> I am using the receive antenna input the receive antenna will go to  
> both
> receivers. Is this correct?