[Elecraft] Problem with K2 Spot function, etc.

[Steef PA2A]

Phil,

In the ST-L menu you can choose for a pin of an IC that generates the tone. 
It is on page 55 of the KPA100 manual.

73 's Steef PA2A
K2 4654
K3 1184

----- Original Message ----- 
From: "Phil and Christina" <phils at rio.com>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, August 12, 2008 6:11 AM
Subject: [Elecraft] Problem with K2 Spot function, etc.


>I have K2 s/n 4635 which has given me good service since I built it.  About
> a month ago, I started using a 6 meter transverter (XV50) that I built.
> That works well with the K2.  However, since then I have had two 
> occurrences
> of a problem.  The first time I fixed it (not sure how) or it cleared
> itself.  The second occurrence is happening now.
>
> The most noticeable symptom is that the SPOT function does not work.  In
> addition, TUNE seems a bit sluggish to turn on and there is no tone with 
> it.
> A few of the other buttons may be sluggish too.  This happens with the
> transverter out of the line (straight HF K2).  What should I look for?
> Thank you.
>
> 73,
>
> Phil Shepard
> NS7P
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>