[Elecraft] Re: KRX3 antenna routing

[Dave G4AON]

Chris another issue is the external RX "RF OUT" from the KXV3 is routed 
via the TX low pass filter. For example listening on an external 
receiver on 80m is OK unless the K3 is on 160m, etc.

73 Dave, G4AON

I have a specific contest application coming up where we will be using
SR2O. The idea is for the 2nd op to be monitoring a band other than the
Run band. We are only allowed one antenna and have designed it such that
the KAT3 will handle all the impedance presented on the various bands. I
had hoped that the K3/KAT3/KXV3/KR3X antenna routing would allow us to
connect the 2nd rx directly to the antenna
and not via the ATU. Studying the manual I can't see how that can be
done. Can anyone confirm this?