[Elecraft] K2 USB interface

[Logan Zintsmaster]

I split my serial port with two cables.  One cable picks up the RTS/CTS for
the PTT function.  The other one picks up TXD and RXD for the K2.
Alternatively, some control programs will use the serial interface to send a
serial Transmit command to the K2 instead of using the PTT.

Hope this helps.
Logan, KZ6O
#1609

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Robert Clutson
Sent: Thursday, July 31, 2008 3:35 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K2 USB interface

When using the K2 with PSK I use the computer 9-pin serial port for the PTT.
With only one serial port I then lose the digital read-out from the K2 into
my logging program (LOG-EQF).
Is there any published advice on connecting the K2 digital output to a USB
port?
thanks
Robert (g0who)

-- 
_______________________________________________
Surf the Web in a faster, safer and easier way:
Download Opera 9 at http://www.opera.com

Powered by Outblaze
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com