[Elecraft] K3 Headphone jack/front panel gap

Terry Schieler terry.schieler at wirelessusa.com
Tue Apr 29 11:37:23 EDT 2008


Chuck, AE4CW, posted:

" Ron, I too had the headphone jack problem.  After talking with tech
support I reveisited the assembly and am certain it's perfect, but there is
still a gap between the shoulder of the headphone jack and the front panel.
I measured it with a shim guage but, unfortunately have forgotten the
number. 
In any case I found a thin washer (from another 1/4" jack) that filled the
gap perfectly and intalled it over the jack threads behind the panel. 
Perhaps there was as parts variation from the vendor that could account for
the gap."


Chuck et al....

I had the exact same issue with the headphone jack and the "thick washer"
used to space it from the front panel.  Everything has been checked and
double checked and the thick spacing washer still rattles between the board
mounted headphone jack and the front panel.

I posted my concern here months ago and received responses like Chuck did
above.  On the other hand, I received half a dozen direct emails from other
K3 owners who experienced the loose spacing washer.  All seemed to feel that
their fitting of the front panel was correct in every other area.

I think it's an issue other than a poorly fitted front panel or binding mic
connector.

My 2 cents.

Terry, WØFM
K3/100 #474




-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
elecraft-request at mailman.qth.net
Sent: Tuesday, April 29, 2008 2:38 AM
To: elecraft at mailman.qth.net
Subject: Elecraft Digest, Vol 48, Issue 48

Send Elecraft mailing list submissions to
	elecraft at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
	elecraft-request at mailman.qth.net

You can reach the person managing the list at
	elecraft-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Elecraft digest..."



More information about the Elecraft mailing list