[Elecraft] K3: two problems

[Dr. Werner Furlan]

hi Ken, 

Ken K3IU schrieb am 28 Apr 2008 um 14:20:

> With respect to your second problem, the mic high / low setting is 
> working on #202 with latest firmware. It is easy to demonstrate if you set
> the MAIN:MIC SEL to high (rP.H in my case), set compression to zero(0), and
> MIC gain to zero(0), and the METER to display the ALC. Tap the XMIT button
> to key transmitter, speak into mic and increase the MIC gain to produce an
> ALC indication of 4-5. Then reset the the MAIN:MIC SEL to low (rP.L in my
> case). Now, without changing the MIC gain or the compression,  tap the XMIT
> button and speak into mic. I see no ALC action at this time. This clearly
> indicates that the high / low setting is working. 73, Ken Wagner K3IU K3

you are right!
with this method I find the same performance like you. 

Is a maximum power output of 45 Watt peak in SSB normal?
(mesured with a LP100)
Power with CW is showing 100W with the same instrument.


73! de Werner OE9FWV

-- 
Good judgment comes from experience, and a lot of that comes from bad 
judgment.


Email powered by Pegasus Mail free at <http://www.pmail.com>
Homepage: <http://www.qsl.net/oe9fwv/>
Fone +43 5522 75013
Fax +43 820 555 85 2621
Mobile +43 664 6340014
Elecraft K2 #5203