[Elecraft] K3 with SteppIR

[VE3NFK]

Hi Jim

I use the K3 with TRX-Manager and my 4el SteppIR.
The K3 is on COM 13 (an FTDI USB-serial adapter)  and the SteppIR is
'Synchro' on COM 12 4800 baud.

The SteppIR happily follows my K3 around.  
 
Disclaimer - I am a Beta tester for TRX.

73

John VE3NFK

PS - I know Laurent, the author of TRX will be tweaking his software to take
advantage of the K3's attributes.




jpk5lad wrote:
> 
> Is anyone on the reflector using their K3 with a 
> SteppIR antenna and a logging program on their 
> computer?  I'm hoping to build a cable to unite my 
> K3 (due in May or June) to the SteppIR box and the 
> computer running Logger32.  My Icom IC-756PRO 
> just parallelled the CI-V cable from the radio to the 
> SteppIR box and the serial port on the computer. I'm 
> pretty sure the K3's not going to be that easy. 
> 
> Since the K3 is outputting to a serial port it sounds 
> easy to connect to the computer's serial port but I 
> don't quite see where the SteppIR box interfaces into 
> the picture.  Has anyone already plowed this 
> ground?
> 
> Any help is appreciated.
> 
> 73,
> Jim - K5LAD
> 
> 
> 
> 
> 
> 
> "It's so simple to be wise. Just think of something
> stupid to say and then don't say it." -- Sam Levenson
> --------------------------------------------------------------------
> http://www.hayseed.net/~jpk5lad/
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> 

-- 
View this message in context: http://www.nabble.com/K3-with-SteppIR-tp16824583p16834898.html
Sent from the Elecraft mailing list archive at Nabble.com.