[Elecraft] K3 - CW decode on TX only for keyer?

[Robert Tellefsen]

Keith
If you have another rig, like a K2, key it into a dummy
load and listen on the K3.  You can use the decoder then
as if it was listening to real signals on a band.
73, Bob N6Wg

----- Original Message ----- 
From: "Darwin, Keith" <Keith.Darwin at goodrich.com>
To: <elecraft at mailman.qth.net>
Sent: Monday, April 21, 2008 10:42 AM
Subject: [Elecraft] K3 - CW decode on TX only for keyer?


IIRC, the manual says that only the CW from the internal keyer can be
decoded by the DSP; not CW sent with a manual key or external keyer.
Bummer, I was hoping to use that internal CW reader to help me
practice
my bug & straight key skills.

- Keith N1AS -
- K2 5411.ssb.100 -
- K3 711 -
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com