[Elecraft] Problems with K3 Calibration

[Todd J Gahagan]

thanks Vic,  I suspected that was the case.  Now on to the other problem.

Todd

----- Original Message ----- 
From: "Vic K2VCO" <vic at rakefet.com>
To: "Todd J Gahagan" <tgahagan at imt.net>
Cc: "Elecraft List" <Elecraft at mailman.qth.net>
Sent: Tuesday, April 15, 2008 8:54 PM
Subject: Re: [Elecraft] Problems with K3 Calibration


> Todd J Gahagan wrote:
> 
>> 1. In trying to do the reference oscillator calibration(I have the
>> 1ppm TCXO) (using method 3) I can get into the CONFIG:REF CAL menu
>> entry, but when I tap "1" I can't get to REF xxC.  Tapping 1 seems to
>> change the mode from CW to AM, the AGC speed, turns on the VOX, and
>> changes the filter from 1 to 2 but I am not able to get to REF xxC.
> 
> I'll answer the easy one: this method isn't implemented in the firmware 
> yet. Just use the method that zero-beats WWV.
> -- 
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco
> 
>