SV: [Elecraft] K3 and the front panel

[Lennart Michaëlsson]

Well guys,
Problem solved (or soldered).
The small red delta TX LED was so misaligned I had to remount it,  now it
all fits nicely.
For all of us living outside NA there is a minor error on page  17 where
3/16" is calculated to be 17 mm which of course is wrong, should read 4.7
mm.
73
Len
SM7BIC and No 708

-----Ursprungligt meddelande-----
Från: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]För Lennart Michaëlsson
Skickat: den 15 april 2008 10:23
Till: Elecraft List
Ämne: [Elecraft] K3 and the front panel

Got mine a few days ago.
When mounting the DSP to the front panel there is a large washer over the
phone shaft.
Cannot get a tight fit between this washer and the back of the front panel.
Yes I am using the correct stand offs. Is something missing on page 34-35?
Depart from that it is a real joy to handle this nice piece of engineering
art.
Thanks in advance
Len SM7BIC

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com