[Elecraft] AGC hang after transmitting

[Joe Subich, W4TV]

Knut, 

The problem has nothing to do with the receiver.  The problem 
occurs when the mic input is overdriven and the microphone AGC 
reduces the gain in the transmit audio path.  

Lyle is working on the problem. 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of ab2tc
> Sent: Monday, April 14, 2008 2:53 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] AGC hang after transmitting
> 
> 
> 
> Hi all,
> 
> There has been a lot of posts lately of an apparent problem 
> with the TX mic gain being low initially or after a recorded 
> message finishes. I have never noticed this, but I have the 
> exact opposite problem. Occasionally when ending an SSB 
> transmission, the RX initially has reduced gain and I can see 
> the S-meter decaying as the receiver recovers. It doesn't 
> happen every time. I am not sure whether there was always a 
> strong signal in the receiver immediately prior to 
> transmitting when this happens. Anybody else experiencing this?
> 
> Knut - ASB2TC
> -- 
> View this message in context: 
> http://www.nabble.com/AGC-hang-after-transmitting-tp16686734p1
6686734.html
Sent from the Elecraft mailing list archive at Nabble.com.

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com