[Elecraft] K3, 15 Pin Acc Cables - Commercially Made

[Brett Howard]

I'm quite pleased with the use of the connector.  It's a standard relatively
easy to find thing and gets the job done.  There are some that won't be
happy no matter what you do.  

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Charles Harpole
Sent: Thursday, April 10, 2008 11:37 AM
To: Timothy Raymer; elecraft at mailman.qth.net
Subject: RE: [Elecraft] K3, 15 Pin Acc Cables - Commercially Made


Another reason NOT to use the computer-use socket on a ham radio.....  Tiny
wires, tiny pins, weak strain relief.... do I need

say any more.....   Come on, designers:  remember your customers have normal
sized hands and weak eyesight!!!

73




Charles Harpole


k4vud at hotmail.com   





> Date: Thu, 10 Apr 2008 12:23:43 -0500
> From: Timothy.Raymer at mdc.mo.gov
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3, 15 Pin Acc Cables - Commercially Made
> 
> Don,
> 
> One caveat to this:  VGA cables are normally wired as a series of coaxial
cables.  So while you may have pin continuity, that continuity may be on a
shield of RG-174/U coax buried in the jacket of a larger cable.  
> 
> I have found high density 15 pin connectors and soldered to them before.
It is not fun.  But in that application, it was the only way to get the
correct connections, the correct wire type, and so on, connected to the
device.
> 
> Tim Raymer
> 73 de KA0OUV
> K2 #1383
> 
> >>> "Don Nesbitt" <drnesbitt at bellsouth.net> 04/10/2008 11:36 >>>
> I've found two (2) "ready made" cables that may be of interest to K3
owners
> when using the ACC Socket.  The ACC socket is referred to on page 18 of my
> manual as "AUX I/O" with the caution that this is NOT a VGA video
connector!
> Well, it sure looks like a VGA connector but alas, no video output from
the
> K3 - shucks!
> 
> For those who just don't want to fabricate a cable, most commercially
> available VGA cables do not include the #9 pin and for some that do, the
pin
> is not connected to anything. Poo!
> 
> Fully connected commercial cables found!
> 
> The first is a VGA Splitter Cable ("Y" cable) with one male and 2 female
> ends.  It is offered by Cables Unlimited (www.cablesunlimited.com) and is
> their part number PCM-2250.  Search this part number on their site.  It is
> listed on their site for $14.99.  All 15 pins are present and connected.
> 
> This "Y" cable is carried by my local Microcenter (www.microcenter.com)
and
> is their part number 028126.  I bought it for $9.95.  You can see it at:
> 
>
http://www.microcenter.com/search/search_results.phtml?keyword=028126&submit

> .x=17&submit.y=12
> 
> The second cable is a "Fully-Wired & Straight Thru, HD15MM" cable with all
> 15 pins present and connected.  The one I bought is a 3 foot Male to Male
> (although it is also available in other configurations) - no snickering!
> 
> It is made by QVS (www.qvs.com) and is their part number CC388B-03.  You
can
> search this part number on their site.  I don't believe that QVS sells
> directly to consumers but you can probably find their products at most
> computer stores.
> 
> Again, I found it at my local Microcenter.  It is their part number
810150.
> I bought it for $14.99.  You can see it at:
> 
>
http://www.microcenter.com/search/search_results.phtml?keyword=810150&submit

> .x=15&submit.y=9
> 
> I've checked each of these cables and they do indeed have all 15 pins
> connected - at least the one's I bought do (caveat filed just in case they
> change their manufacturing process)!
> 
> I don't have any financial interest in any of the above and, as usual,
YMMV.
> '73 es gud dxing -- Don N4HH K3 #83
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net 
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm 
> Elecraft web page: http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com